Let the camera adjust to the warmer temperature before taking it out of the bag. Automatic Selection Automatic Automatic Selection Selection Automatic Selection With C. Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. O The usual 3-shotbracketing is changed to 2- O In bracketing shots, if you select 5-shotthe shots is —2, —1,0, +1 and +2. O When this function is used in combination at full charge.
Specifying the Color You can set the color matrix. For details on changing, refer to the Canon web site. To turn on the camera again, just press the shutter button halfway. In actual use, the items displayed differ according to the shooting situation. All operations described in this Instruction Manual assume that the switch is already set to.
You can avoid this by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag. Printer warming up The printer is preparing for printing. When focus is achieved, the beeper will sound softly. Use of chargers not expressly recommended may result in overheating, distortion, fire or electrical shock. ¿ The basic settings window appears. This feature is called safety shift.
O Other names and products not mentioned trademarks of their respective companies. The higher the aperture value, the smaller the aperture opening. Fn-14 Auto reduction of fill flash 0: Enable Obtains natural-looking,daylight flash shots automatically. Set the Mode Dial to or. On some types cable while your computer is in sleep mode could prevent the computer from waking up correctly.
You need not press the button first. Enter a value between 0 seconds and 99 minutes 59 seconds in 1-second increments. Bordered The print will have borders. Or the image has been edited with a personal computer. O The modes and settings are preset with the camera.
Bordered The print will have borders. This method is called manual exposure. While printing, monitor the battery level. ¿ The specified Personal Function settings Function settings file. The chemicals in these batteries are very dangerous if the battery is accidentally swallowed.
Set the camera for playback. Before cleaning the image sensor, detach the lens from the camera. If Condensation Forms Inside the Camera Stop using the camera immediately if you detect condensation. Single Image Image with shooting information Index display Magnified view by 1. O If you enter a numerical value, values 5 Check the settings and save p. Otherwise the lens barrel may partially obstruct the flash coverage and cause part of the image to look dark. Standard exposure 0 Decreased exposure —1.
Check that the icon is lit. Fn Custom Function settings 146 1 Clear settings Clear all camera settings Clear all Custom Functions 144 1 Sensor clean Turn off the camera after sensor cleaning 156 1 Firmware Ver. If it is underexposed or overexposed, a correct white balance setting might not be obtained. Use only the recommended power accessories. Disassembly or alteration may result in high-voltageelectrical shock.
Either use a wide-anglelens or move further away from the subjects. The shutter speed and aperture value are determined automatically, just as in Full Auto mode. If the camera sets a slow shutter speed, hold the camera steady or use a tripod. Follow the instruction below according to the error code. Use of any other cable may lead to a malfunction. Doing so can distort the cards and make them unusable.
Camera is not operating properly. Therefore, use a tripod to prevent camera shake. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is serious risk of injury due to an explosion. Red-eyeis particularly prevalent when the flash is close to the optical axis of the lens. Spot metering circle 3 Press the button. If you use a microdrive, be careful not to subject the camera to vibration, shake, or physical shock while it is recording or displaying images.